Custom LED channel letters with seamless illuminated faces and no visible trim caps. Made to your logo or lettering in custom sizes, colors, and finishes for storefronts and commercial signage.
20 Years
Manufacturing Experience
1 Set
Minimum Order
5–7 Days
Typical Production*
4-Year
LED Warranty
*Production time depends on drawings and customization. Acrylic warranty: 5 years. Transformer warranty: 3 years.
Send your artwork, dimensions, and installation location for a custom quote.
PDL Sign is an OEM/ODM manufacturer with 20 years of manufacturing experience. We produce custom trimless channel letters for sign companies, contractors and commercial branding projects, with metal and acrylic fabrication matched to the approved drawings.
Trimless construction removes the visible front trim cap while retaining the letter returns. Before production, we confirm artwork, letter depth, lighting, mounting points and cable exits to suit the installation site and maintenance access.
Explore our manufacturing capabilities categorized by lighting style, materials, construction, mounting, and design format.
Custom letters with illuminated acrylic faces and no visible trim cap, designed for storefront names and commercial logos.
Explore our front lit channel letters for more face illumination options.
Letters with rear illumination that creates a halo on the wall.
Explore our reverse channel letters and specify the mounting gap and wall finish for the required effect.
Combine an illuminated face with rear halo lighting.
Explore our front and back lit channel letters and customize face and halo colors for storefronts, hotels and reception signs.
Illuminated letter edges create a distinct outline.
Customize the face finish and exposed acrylic depth to control the lighting effect.
Color-changing letters for commercial branding and programmed lighting.
Explore our RGB LED channel letters and choose RGB or RGBW lighting with a compatible control system.
Lightweight aluminum returns with custom painted finishes.
Suitable for storefront signs and larger letter installations.
Metal returns with brushed, polished or coated finishes.
Specify 304 or 316 stainless steel according to the installation environment.
Light-transmitting acrylic faces without a visible trim cap.
Customize face color, thickness and finish to suit the artwork.
Resin-filled faces for a smooth illuminated surface.
Letter size, stroke width and installation conditions determine the suitable construction.
Acrylic faces with translucent vinyl for custom colors and graphics.
Suitable when standard acrylic colors do not match the design.
Individual letters mounted directly to the wall for a clean layout.
Requires planned cable exits and access to the power supply.
Letters mounted with spacers to create a wall gap.
Suitable for halo lighting and installations requiring clearance behind each letter.
Letters mounted on a shared raceway that houses wiring and can reduce wall penetrations.
Customize the raceway finish to suit the facade.
Letters pre-positioned on a backing panel for coordinated installation.
Suitable for uneven walls or projects requiring a complete sign assembly.
Individual letters made to your font, dimensions and lighting requirements.
Ideal for business names and architectural signage.
Illuminated logos and symbols made from supplied artwork.
Construction is selected according to detail size, color separation and mounting needs.
Share your design with Nick or Devin to discuss your project.
| Min. Order | 1 set |
|---|---|
| Lead Time | 5–7 days (post-drawing confirmation) |
| Op. Temp | −10°C to 50°C |
| Warranty | 4 Years (LEDs: 4 yrs, Acrylic: 5 yrs, Transformers: 3 yrs) |
| Supply List | 1:1 installation template, wiring diagram, mounting hardware, marked cables, packing list. Configured power supplies & controllers. Export wooden crates. |
For storefront letters and custom logos, we review stroke widths, letter depth, cable exits and mounting points before production. CNC cutting, laser welding, metal bending and acrylic fabrication are selected to suit the approved construction.
Aluminum or stainless steel returns can be paired with acrylic faces and brushed, polished, painted or powder-coated finishes. Material and finish selections are confirmed before production to coordinate the face, returns and mounting components.
We check LED operation, face illumination and complete sign functions before packing. RGB/RGBW orders also receive controller matching and synchronization checks, with product photos retained for project records.
Addressing key questions about design feasibility, lighting quality, and installation.
Thin strokes, small text and sharp corners may be difficult to manufacture or illuminate clearly.
We review your artwork, letter size and stroke width before quoting, then recommend a suitable depth and construction. Any design adjustments require your approval.
Visible LED dots, dark edges and uneven brightness can affect how your sign looks after installation.
We plan LED placement around the letter shape, depth and acrylic diffusion, then inspect the illuminated letters before packing.
Buyers need to know whether exposed face joints and electrical components can withstand rain and sunlight.
We select materials and specify joint sealing, cable protection and drainage for your installation conditions. IP65 outdoor options are available.
A face color that looks correct during the day may look different when illuminated, especially across multiple store locations.
We confirm acrylic color, surface finish and LED color temperature before production. Samples are available to evaluate the daytime and illuminated appearance.
Individual wiring, wall drilling and unclear mounting instructions can increase labor costs and delay installation.
We recommend mounting options based on your wall and wiring access, with a 1:1 installation template and wiring drawings to guide fitting.
Buyers worry that a failed LED or power supply will require replacing the entire sign or damaging the acrylic face.
We confirm how the letters open and how components can be accessed before production, helping you choose a construction suited to future maintenance.
Send your artwork, dimensions, and installation location for review.
A section drawing explains how the letter is assembled and mounted. Before approving production, check the face retention method, exposed acrylic edge, cable exits and mounting points.
For halo-lit designs, confirm the wall gap separately from the letter depth. The drawing should also show how the letters can be opened for servicing and whether mounting spacers are included in the overall projection from the wall.
Light transmission describes how much light passes through acrylic. Diffusion describes how the material scatters light to soften the appearance of individual LEDs.
Higher transmission alone does not guarantee a more uniform face. Acrylic properties, LED lenses, module spacing and internal depth work together. Evaluate illuminated samples using the proposed construction, especially for shallow letters or designs with narrow strokes.
RGB lighting combines red, green and blue channels to create changing colors. Mixing these channels can approximate white, but the appearance depends on the LEDs and control settings.
RGBW adds a dedicated white channel, making it useful when a sign needs both color effects and regular white illumination. Specify the required white color temperature. Controllers, decoders and power supplies must match the lighting voltage, channel configuration and current requirements.
IP65 indicates dust-tight protection and resistance to water jets under defined test conditions. It does not indicate suitability for submersion.
An IP-rated LED module does not establish the protection rating of the complete sign. Letter enclosures, cable entries, connectors and power supplies must each suit their installation location. UV resistance and corrosion resistance require separate consideration because an IP rating does not describe these properties.
Estimate daily energy use from the sign's total electrical input power:
Daily Energy Use (kWh) = Input Power (W) ÷ 1,000 × Operating Hours
For example, a sign drawing 120 W for 10 hours daily uses approximately 1.2 kWh per day. Multiply this figure by your electricity rate to estimate the daily running cost.
Power supply capacity is different from actual consumption. Select capacity according to the manufacturer's loading and temperature requirements. If calculations use LED output loads rather than measured system input power, power supply losses must also be considered.
Power supply capacity does not represent the sign's actual electricity consumption. The 120 W calculation is an example only.
Display store names and logos on shopfronts, entrance fascias and interior brand walls. The border-free face supports clean lettering for both individual stores and multi-location retail projects.
Use trimless letters for hotel entrances, reception desks, lounge names and restaurant signage. Letter size, metal finish and lighting color can be coordinated with the surrounding architecture.
Identify venues on exterior storefronts, behind service counters or on feature walls. Choose white, single-color or RGB lighting to suit the venue’s branding and atmosphere.
Present company names and logos behind reception desks, in entrance lobbies and within office interiors. Concealed wiring and planned mounting positions help maintain a tidy appearance.
Highlight branding in automotive, furniture, electronics and product showrooms. Letters can be mounted on display walls or backing panels, with transport and assembly requirements considered for exhibition use.
Create illuminated business names for reception walls, treatment-area entrances and storefronts. Face colors, return finishes and white-light color temperature can be selected to complement the interior.
Identify buildings, tenants and commercial entrances. Outdoor projects require suitable weather protection, structural mounting and letter dimensions matched to the viewing distance.
Display venue names, exhibition titles and visitor-area identifiers. Lighting brightness and finishes can be selected to maintain readability while complementing the exhibit environment.
Explore our custom LED channel letters in real-world environments. These unedited, on-site photos from our clients demonstrate the true quality, illumination, and durability of our manufacturing standards.
Client Installation
On-Site Display
Factory Verification
Outdoor Environment
Evening Performance
Facade Installation
Fostering long-term partnerships through transparent communication, on-site consultations, and dedicated project management.
Confirm the letters, power supply, mounting hardware and wiring drawing match your order. Test the lighting before installation.
Position the 1:1 installation template. Check letter spacing and alignment, then mark fixing points and cable holes.
Drill the marked holes and fit anchors suitable for the wall material. Secure any raceway, backer panel or hanging support.
Secure each letter using the supplied mounting system. Maintain the stand-off gap specified in the drawing for halo-lit letters.
With power disconnected, connect the letters to the specified DC power supply, following the wiring diagram and polarity markings.
Have a qualified electrician complete the mains connection. Check illumination, alignment and any dimming or color controls, then clean the sign.
Electrical Connection: Match the power supply output to the LED voltage. Never connect LED letters directly to mains power.
Wall and Fixings: Check for concealed cables and pipes before drilling. Use fixings suitable for the wall material and sign weight.
Letter Handling: Avoid pressure on acrylic faces and trimless edges. Do not overtighten mounting hardware.
Outdoor Installation: Seal cable entries and electrical connections. Keep drainage holes clear.
Power Supply Placement: Keep the power supply ventilated, protected from the installation environment and accessible for maintenance.
Adjustment and Cleaning: Disconnect power before adjustments. Clean with a soft cloth and an acrylic-compatible cleaner.
Our engineering team is available 24/7 to assist with your installation.
We utilize multi-layer protection to safeguard the acrylic faces, trimless edges, and cables during transit. Packaging methods are tailored to the order size, weight, and shipping method.
Surface Protection
EPE Corner Guards
Carton Enclosure
Secure Strapping
Careful Loading
Global Shipping
Understand letter construction, lighting terms, and visibility considerations before specifying your custom sign.
Opaque metal returns and exposed acrylic edges produce different side-lighting effects.
The sidewalls that give channel letters their depth. Returns form the letter body, enclose internal lighting components and define the sign’s appearance from the side. Their material and finish also affect weight and visual character.
Trimless construction does not automatically mean illuminated sides. Opaque metal returns block light, while exposed or translucent acrylic edges may allow side illumination. The effect depends on the edge design, light-blocking treatment and LED placement.
Illustration of face thickness, overall letter depth, and internal construction.
Acrylic thickness refers to the thickness of the face panel. Overall letter depth is the distance from the front face to the back of the letter. Usable internal depth is smaller because the face, back panel and fixing structure occupy space.
Measured in Kelvin (K), color temperature describes the appearance of white light. Lower values produce warmer, yellowish light, while higher values produce cooler, bluish light. Color temperature does not indicate brightness, and the acrylic face can influence the final appearance.
Watts measure electrical power, rather than visible brightness. Two signs using the same power may look different because of LED efficiency, face materials, letter dimensions and internal construction.
Clear letter edges and open spaces help maintain nighttime legibility.
Excessive glow can make letter edges and internal spaces less distinct.
Illustrative examples from different storefronts; not a measured before-and-after comparison.
Readability depends on letter height, stroke width, character spacing, background contrast, and viewing angle. Open letter shapes help viewers recognize wording at a distance. Roadside signs also need to account for vehicle speed and available reading time.
Brightness should suit the surrounding light levels. Excessive brightness can make fine strokes and gaps appear less distinct at night. Where compatible, dimming controls allow light output to be adjusted for viewing comfort and clarity.
We respond within 24 hours. For urgent inquiries, contact us via WhatsApp or email.
Building 1, Tahoe Plaza, No.339 Baodao Middle Road, Hubin Street, Shishi City, Fujian Province, China